[c-nsp] Cisco 650x sup2 / sup32 configuration - what makes sense?

Dimuth Ileperuma dimuth at beoffices.com
Thu Dec 8 12:33:32 EST 2011

Dimuth Ileperuma MSc, CCIP
Pricipal Cisco Engineer
For and on behalf of
Part of the Business Environment group of companies

Tel:       +44 (0) 207 959 6033
Fax:      +44 (0) 207 959 6041
Email:   dimuth at beoffices.com
Web:    www.beoffices.com

Business Environment Limited | 12 Groveland Court | Bow Lane | London | EC4M 9EH

This e-mail transmission is intended only for the use of the person(s) to whom it is addressed and may be privileged, confidential and exempt from disclosure under applicable law.  If you are not the intended recipient please do not copy or convey this message to any
ther person but delete this message and notify us via e-mail to info at beoffices.com

It shall be understood by the recipient(s) that conclusions, opinions and other information contained in the above e-mail not relating to the official scope of Business Environment Limited shall be deemed not to have been given or endorsed by Business Environment Limited.

Business Environment Limited  Registered in England No. 05729231  Registered office: Emerald House East Street Epsom Surrey KT17 1HS

 please do not print this e-mail unless you really need to

----- Original Message -----
From: cisco-nsp-bounces at puck.nether.net <cisco-nsp-bounces at puck.nether.net>
To: Łukasz Bromirski <lukasz at bromirski.net>; cisco-nsp at puck.nether.net <cisco-nsp at puck.nether.net>
Sent: Thu Dec 08 12:52:39 2011
Subject: Re: [c-nsp] Cisco 650x sup2 / sup32 configuration - what makes sense?

You need the newer fan module though for the SUP720/RSP720

Kind regards,

Þann 7.12.2011 23:29, skrifaði "Łukasz Bromirski" <lukasz at bromirski.net>:

>On 2011-12-08 00:25, Andrew Miehs wrote:
>>> The 67XX/69XX cards are incompatible with the Sup2/Sup32 since they are
>>> non-fabric enabled supervisors.
>>> For the 67XX cards you'll need a SUP/RSP720
>> And he/ you will require an "-E" chasis.
>Sup720 and 67xx will actually work in non E chassis.
>You need E chassis for Sup2T and new 80Gbit/s LCs.
>"There's no sense in being precise when |               Łukasz Bromirski
>  you don't know what you're talking     |      jid:lbromirski at jabber.org
>  about."               John von Neumann |    http://lukasz.bromirski.net
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>archive at http://puck.nether.net/pipermail/cisco-nsp/

cisco-nsp mailing list  cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list