[c-nsp] Configure MPLS on Cisco 3945

[Andriy Bilous]

You gonna need DATA license to enable MPLS capabilities.

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985.html#wp9000809

On Sat, Dec 17, 2011 at 10:57 PM, Righa Shake <righa.shake at gmail.com> wrote:
> Hi,
>
> Am trying to configure MPLS on a cisco 3945 with the below features however
> the command mpls ip, or tag-switching are not accessible.
>
> System image file is "flash0:c3900e-universalk9-mz.SPA.151-2.T1.bin"
> Technology Package License Information for Module:'c3900e'
>
> ----------------------------------------------------------------
> Technology    Technology-package          Technology-package
>              Current       Type          Next reboot
> -----------------------------------------------------------------
> ipbase        ipbasek9      Permanent     ipbasek9
> security      securityk9    Permanent     securityk9
> uc            None          None          None
> data          None          None          None
>
> I have managed to configure vrf instances withouth any problem.
> Any assistance in enabling MPLS (MPBGP) on the router will be highly
> appreciated.
>
> Regards,
> Righa Shake
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/