[c-nsp] How to see interface configuration after card failure on ASR9K

Mark Tinka mtinka at globaltransit.net
Wed Dec 28 08:18:55 EST 2011

On Wednesday, December 28, 2011 06:45:09 PM Gert Doering 

> Actually, IOS does this as well, if you replace a PA on a
> 7200 or a board on a catalyst switch - if the board is
> removed, the config isn't shown anywhere, but still
> remembered.  If you insert a board of "compatible type"
> (PA-FE -> PA-FE, but not -> PA-E3, etc) the config will
> be back...

Cool, but what I meant was more of a "I can configure 
interfaces before they are physically installed" feature.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20111228/65d3d802/attachment.sig>

More information about the cisco-nsp mailing list