[c-nsp] SNMP Question

Stewart, Jeffrey, S jeff.stewart at topper.wku.edu
Thu Feb 3 12:06:41 EST 2011

You could try a MIB walk to determine the proper OID.
From: cisco-nsp-bounces at puck.nether.net [cisco-nsp-bounces at puck.nether.net] on behalf of Scott Voll [svoll.voip at gmail.com]
Sent: Thursday, February 03, 2011 10:23 AM
To: cisco-nsp at puck.nether.net; cisco-voip at puck.nether.net
Subject: [c-nsp] SNMP Question

I'm trying to monitor my PRI utilization with Cacti.

I have found that for my 3845 (running 15.0) with PRI in slots 0/0/0 I can
use OID

But I'm having trouble finding PRI's in slots 0/1/0 and 0/1/1.  How do you
normally go about finding the OID that you want to monitor?  Sorry if this
is a Newb question.  I've tried using MIB Viewers without success.


cisco-nsp mailing list  cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list