[c-nsp] Tool to Calculate Rate Limits

[Ziv Leyes]

One formula that always worked fine for me is, when you set 
rate-limit Bandwidth(bits) BC(bytes) BE(bytes)

You calculate both BC and BE like this: BE=BC= Bandwidth / 8 * 1.5

Ziv

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Righa Shake
Sent: Sunday, February 06, 2011 4:25 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Tool to Calculate Rate Limits

Hi,

Anyone know of a tool that can be used to calculate rate limits on cisco routers.

Regards,
Shake
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

 
 
************************************************************************************
This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************




The information contained in this e-mail message and its attachments is confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the sender, and then delete the message from your computer.  Thank you!

******** This mail was sent via Mail-SeCure System.********



 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************