[c-nsp] issues with 6500 platform
Peter Rathlev
peter at rathlev.dk
Tue Feb 8 11:32:07 EST 2011
On Tue, 2011-02-08 at 10:01 -0600, Jason Cardenas wrote:
> #show platform hardware capacity
...
> Interface Resources
> Interface drops:
> Module Total drops: Tx Rx Highest drop port: Tx Rx
> 3 3020928236 0 12 0
That might be a problem. What does "show interface" counters tell you
about "output drops", at least for Gi3/12 but probably also other
interfaces? Are the 3,020,928,236 drops a significant amount compared to
"packets output"?
Try "show queueing interface Gi3/X" for every X with a significant
amount of "output drops".
It does not in itself explain why the drops are selective of course.
Unless you have some complex-ish QoS-marking somewhere.
> Pete Lumbus, we're looking into that direction; but we simply don't
> have anything like "QoS, tcp adjust-mss" on our interfaces
But you have QoS enabled globally. With no interface specific
configuration you might have worse results than with no QoS at all.
--
Peter
More information about the cisco-nsp
mailing list