[c-nsp] Bonded T3 Bandwidth issue

[Lawrence]

Here is the further information that you have requested.  I am using
iperf unix client/server to test my speed.  I have the same 45M limit
if I try a bit torrent.  I have a cisco 7200 router that is connected
via a mvp copper to fiber converter. The t3s are bonded with an anda
2200.  I have unbonded both t3s and they both get 45M over each
circuit.

On Wed, Feb 23, 2011 at 19:40, Lawrence <cisco-nsp at theindianmaiden.com> wrote:
> I have a bonded T3 that I have never been able to get over 45mbs. I
> have been on the phone with my ISP and they are able to verify that
> both circuits work and they feel bonded  circuits are working fine and
> that any problem is on "my side" Does anybody know what could cause a
> bonded T3 not to be able to deliver bandwith over 45 mbs?
>
> o I am testing this circuit with a udp client/server transfer program
> with the server on an att circuit that can more than handle 100 mbs.
>
> o I have tied to hit the bonded t3 with muliple isps just incase it is
> an isp to isp thing. The t3's never go over 45 mbs.
>
> o I have run mutiple "speed test.net" benchmarks and that never show
> any speed faster that 45mbs (They work with my att circuit when leads
> me to belive that that are semi reliable)
>
>
> Any help is appreciated!
>