[c-nsp] Bonded T3 Bandwidth issue

[Lawrence]

The 2212 DS3\E3 does the bonding and as you have stated the 7200 is
out of the bonding role.  Could this have anything to do with the
negotiation between my fiber to copper converter and my router? This
is what my wan provider is telling me.

On Fri, Feb 25, 2011 at 09:02, Mark Kent <mark at noc.mainstreet.net> wrote:
>>> The anda is a metro E box.  Are you bonding them and then turning
>>> the whole thing into ethernet? Also, how are they bonded?  Are you
>>> running ml-ppp between the anda and the cisco?
>
> Doesn't it seem likely that the Anda box is the one doing the bonding?
> I see there is a 2212e model that has two DS3 wan interfaces.  I would
> expect the fastE interface on this to be facing the cisco7200, which
> would take the cisco out of the bonding role.
>
> -mark
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>