[c-nsp] DSCP Trust on 67xx cards

[Robert Hass]

I'm a little confused regarding DSCP Trust support at 67xx linecards
at 6500 platform. Documentation says that COS Trust should be used.
Same shows me sh int capability. Exception is WS-X6708-10GE card where
DSCP is also supported.

Slot 1 - module WS-X6748-GE-TX, Sup720-3B, 6509-E, IOS 12.2(33)SXI5.

#sh int gi1/1 capa | inc QOS
  QOS scheduling:        rx-(1q8t), tx-(1p3q8t)
  QOS queueing mode:     rx-(cos), tx-(cos)

But I configured without problem on this port DSCP Trust as below:

# sh run int gi1/1

interface GigabitEthernet1/1
 ...
  mls qos trust dscp
!

Will it work ? Or it just parser mistake and I must configure "mls qos
trust cos" ?

Thanks,
Robert