[c-nsp] Port profiles

[Andriy Bilous]

There is the smartports macros feature on switches only and it works
differently than you described - you have to apply macro to the
interface/interface range every time you've changed it and it does not
replace but adds the configuration to the existing configuration on
the port.

On Thu, Jan 6, 2011 at 10:37 AM, Mark Meijerink
<Mark.Meijerink at vancis.nl> wrote:
> Hi there,
>
> I wonder if Cisco supports features like port profiles for interfaces. I would like to configure a profile and then configure an interface to have a certain profile. So when I change the profile all the interfaces with that profile will be reconfigured, Does anyone know if Cisco supports this kind of feature? Thanks in advance.
>
> Regards,
>  Mark
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>