[c-nsp] BGP Router

[Mohammad Khalil]

Hi all
I have 2 Cisco ME6524 , i want to deploy them as border routers (i.e. BGP routers)The specifications are as below
cisco ME-C6524GT-8S (R7000) processor (revision 1.3) with 458752K/65536K bytes of memory.Processor board ID CAT1210C00SR7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 CacheLast reset from power-onSuperLAT software (copyright 1990 by Meridian Technology Corp).X.25 software, Version 3.0.0.Bridging software.TN3270 Emulation software.5 Virtual Ethernet/IEEE 802.3 interfaces32 Gigabit Ethernet/IEEE 802.3 interfaces1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 256K).Configuration register is 0x2102
CR3.KJ-AMM-010#show sup-bootflash: -#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name1   .. unknown      7A8AED69 184A0A4   39 25206820 May 28 2008 01:22:40 +03:00 s6523-advipservicesk9-mz.122-18.ZU2.bin
108224348 bytes available (25206948 bytes used)
is the router suitable ? do i have to upgrade IOS for example?
Thanks
Best Regards,Mohammad Khalil