[c-nsp] 7600 and VPLS support

[Phil Bedard]

That is the other thing unsupported without the right cards. :)  You
either need to use the right cards or use an external loopback cable which
basically loops the SVI into a separate P2P interface on the same router.

Phil 

On 1/12/11 9:28 AM, "Pavel Dimow" <paveldimow at gmail.com> wrote:

>Hi,
>
>I just found out that 7600 does not support VPLS without "correct"
>line cards. Now I'am trying to find a solution
>how to xconnect SVI on 7600 (physical L3 int works just fine) in
>point-to-point.
>I tried to use vfi in point-to-point configuration but without success
>as I can't find on cisco.com what else should I configure
>for this kind of vc.
>
>
>l2 vfi TESTING point-to-point
> ! Incomplete point-to-point vfi config
> neighbor 10.10.10.10 3000 encapsulation mpls
>
>Any thoughts?
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/