[c-nsp] local privilege level question

[Keegan Holley]

If all your accounts are level 15 you can enter the "privilege level 15"
command under the vty lines and the console line.  This will automatically
place anyone that authenticates successfully into exec mode regardless of
what type of login authentication you are using.


On Tue, Jan 11, 2011 at 3:58 PM, Greg Whynott <Greg.Whynott at oicr.on.ca>wrote:

>
> hello,
>
> on an ASR1004 we have local accounts where the privilege level is set to
> 15.   when I type 'en' it still asks for the enable password.   is there
> away to prevent this behavior so that persons with local accounts/15 priv
> can execute level 15 commands without being prompted?
>
> we are not using any external sources for authentication,  its all local.
>
>
> thanks for your time,
> greg
>
>
> --
>
> This message and any attachments may contain confidential and/or privileged
> information for the sole use of the intended recipient. Any review or
> distribution by anyone other than the person for whom it was originally
> intended is strictly prohibited. If you have received this message in error,
> please contact the sender and delete all copies. Opinions, conclusions or
> other information contained in this message may not be that of the
> organization.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>