[c-nsp] 3560E TCAM Question

[Tóth András]

Yes, they indeed appear as entries with a Next Hop value of "attached"
in the 'sh ip cef' output.

Best regards,
Andras


On Thu, Jan 20, 2011 at 7:54 PM, Brandon Ewing <nicotine at warningg.com> wrote:
> On Thu, Jan 20, 2011 at 01:07:41PM -0500, Jose Madrid wrote:
>> I have a 3560 and when do I "show platform tcam utilization" it says that I
>> have 1365 directly connected routes.  This is definitely not the case and
>> when I do a "show ip route connected" there are various IP blocks shown, but
>> none longer than a /26 and maybe a total of 30 routes.  Anyone know how
>> these numbers are computed?
>>
>> #sh platform tcam utilization
>>
>> CAM Utilization for ASIC# 0                      Max            Used
>>                                              Masks/Values    Masks/values
>>  IPv4 unicast directly-connected routes:      2048/2048       1365/1365
>>  IPv4 unicast indirectly-connected routes:    1024/1024        190/190
>>
>
> I believe direct-connected routes also includes IP->ARP entries in TCAM.
>
> --
> Brandon Ewing                                        (nicotine at warningg.com)
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>