[c-nsp] %SIBYTE-CFC10-3-CORRECTABLE_ECC_ERR (6500 switch)

[Piotr Wojciechowski]

On 1/23/11 12:49 PM, Farooq Razzaque wrote:
> 
> 
> Hi All
> 
> I am getting the following errors on 6500
>  
> %SIBYTE-CFC10-3-CORRECTABLE_ECC_ERR: A correctable ECC error has occurred, A_BUS_L2_ERRORS: 0x0, A_BUS_MEMIO_ERRORS: 0xFF, A_SCD_BUS_ERR_STATUS: 0xC0DC3000
> 
> 
> Attached is the outputs of show environment command.
> 
> Apparently all the environment are normal ..... 
> 
>  		 	   		  


Hi Farooq,

I don't see show environment output from you but if you say everything
is ok (temperature, voltage ect.) then it may be hardware problem. What
card do you have in slot 10? Does card reload itself or you see any
other logs from this card? It seems like CFC and/or it's memory might
went broken (parity errors?).

Regards,
Peter

-- 
Piotr Wojciechowski  (CCIE #25543)  | "The trouble with being a god is
http://ccieplayground.wordpress.com | that you've got no one to pray to"
JID: peper at jabber.org               |   -- (Terry Pratchett, Small Gods)