[c-nsp] 6500/Sup720 won't run a WS-X6516-GBIC?
David Prall
dcp at dcptech.com
Sun Jan 23 18:17:54 EST 2011
http://www9.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/releas
e/notes/hardware.pdf
Looks like you might need to upgrade the ROMMON.
On page 45:
Note
. Use with Release 12.2(33)SXH or later and a DFC requires DFC ROMMON
version 12.2(18r)S1 or
later. To display the switching module ROMMON version, enter the remote
command module
module_slot_number show version | include ROM command. To upgrade the
switching module
ROMMON, see this document:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/rommon/OL_6010.htm
l
. Supervisor Engine 720 supports a DFC3 on these WS-X6516-GBIC hardware
revisions:
- Lower than 5.0
- 5.5 and higher
. Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC hardware
revisions 5.0
through 5.4. With a Supervisor Engine 720 and with a DFC3 installed,
WS-X6516-GBIC hardware
revisions 5.0 through 5.4 do not power up.
. With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC hardware
revisions 5.0
through 5.4 operate in bus mode.
. See external field notice 24494 for more information:
http://www.cisco.com/en/US/ts/fn/200/fn24494.html
David
--
http://dcp.dcptech.com
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of GP Wooden
> Sent: Sunday, January 23, 2011 5:53 PM
> To: GP Wooden; Jeff Kell; cisco-nsp
> Subject: Re: [c-nsp] 6500/Sup720 won't run a WS-X6516-GBIC?
>
> Converted, as into vss...
>
> ----- Reply message -----
> From: "GP Wooden" <graham at g-rock.net>
> Date: Sun, Jan 23, 2011 3:22 pm
> Subject: [c-nsp] 6500/Sup720 won't run a WS-X6516-GBIC?
> To: "Jeff Kell" <jeff-kell at utc.edu>, "cisco-nsp" <cisco-
> nsp at puck.nether.net>
>
> Ran into the same issue with that card when I converted a bunch of our
> distro's with that same sup. Luckily, I was able to move the connects
> to a 6748 card and just changed fiber jumpers.
>
> ----- Reply message -----
> From: "Jeff Kell" <jeff-kell at utc.edu>
> Date: Sun, Jan 23, 2011 2:22 pm
> Subject: [c-nsp] 6500/Sup720 won't run a WS-X6516-GBIC?
> To: "cisco-nsp" <cisco-nsp at puck.nether.net>
>
> Is this module not supported on this Supervisor? Have a 6509 running
> s72033-ipservicesk9_wan-mz.122-33.SXI3.bin.
>
> Getting this at startup:
>
> *Aug 6 20:00:06.931: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in
> slot 3, power not allowed: The image for the card is not bundled in
> image.
>
> Jeff
>
> >show module
> Mod Ports Card Type Model
> Serial No.
> --- ----- -------------------------------------- ------------------
> -----------
> 3 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC
> SAD061902L2
> 5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G
> SAL1426LK11
> 6 5 Supervisor Engine 720 10GE (Hot) VS-S720-10G
> SAL1424KDCP
>
> Mod MAC addresses Hw Fw Sw
> Status
> --- ---------------------------------- ------ ------------ ------------
> -------
> 3 0003.fea8.f7d6 to 0003.fea8.f7e5 4.1 Unknown 12.2(33)SXI3
> PwrDown
> 5 0025.84bf.dcf0 to 0025.84bf.dcf7 3.2 8.5(4) 12.2(33)SXI3
> Ok
> 6 0025.84bf.c918 to 0025.84bf.c91f 3.2 8.5(4) 12.2(33)SXI3
> Ok
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list