[c-nsp] L2 Ethernet bridging over GRE issues

[David Prall]

And L2TPv3 is supported. Recent code doesn't allow a  bridge-group to be
defined on a tunnel.

David

--
http://dcp.dcptech.com


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Ian Henderson
> Sent: Thursday, January 27, 2011 8:37 PM
> To: Roger Wiklund
> Cc: Cisco-nsp
> Subject: Re: [c-nsp] L2 Ethernet bridging over GRE issues
> 
> On 28/01/2011, at 5:17 AM, Roger Wiklund wrote:
> 
> > I've setup a GRE tunnel from Router A to Router B.
> > I've configured bridging between Tunnel0 and LAN interface on Router
> A
> > and Router B
> 
> While this is possible, its ten times easier and more reliable to use
> L2TPv3.
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/