[c-nsp] active/standy failover

[Deric Kwok]

Hi

In cisco url, it introduces PIX active/standy failover

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml#acti

1/ ls it same as ASA?
2/ How about the physical connection? using Hub or switch. eg: router
--- hub A ----then one is active --- hub B

                                   hub A  --- one is standy --------
hub B
3/ I know it needs same ios and licence, Do it have special requirement?
4/ Where is port for cross over cable between active and standy?

Thank you