[c-nsp] Installation of a PA-MC-2T1 in a 7206

[Justin M. Streiner]

On Tue, 5 Jul 2011, Josh Baird wrote:

> the interface name for a 7206 would be "serial <slot>/0:0," however this
> does not appear to be a valid interface on my 7206.  Does anyone know how I
> can figure out what the interface name really is for the PA?  Or, maybe
> someone who has experience with this PA can tell me?

What you're seeing are the entities for the T1 controller ports.  You need 
to go into the T1 controller and define the number of timeslots, framing, 
coding, clock source, etc.  Once you do that, there will be a serial 
interface that you can configure with encapsulation, IP address, etc...

jms