[c-nsp] Graph cisco 4948 SVI

[Jiri Prochazka]

Dne 8.7.2011 17:33, Nick Ryce napsal(a):
> Hi,
>
> Does anyone know if the 4948 has the ability to be able to graph traffic transiting the SVI of a vlan?  I know the 3550/3560's are unable to do this?
>
> Nick
>

Hi Nick,

it's disabled by default. You have to add statement 'counter' into SVI 
config.

interface Vlan6
  description bb
  ip address x.x.x.x x.x.x.x
  no ip redirects
  no ip unreachables
  no ip proxy-arp
  load-interval 30
  counter
end


-- 
---

Kind regards,


Jiri Prochazka



> ________________________________
> --
>
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the sender. Any
> offers or quotation of service are subject to formal specification.
> Errors and omissions excepted. Please note that any views or opinions
> presented in this email are solely those of the author and do not
> necessarily represent those of Lumison.
> Finally, the recipient should check this email and any attachments for the
> presence of viruses. Lumison accept no liability for any
> damage caused by any virus transmitted by this email.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>