[c-nsp] c6500 turn interface up whitout any physical device connected to it

[Andrew Miehs]

On Fri, Jul 15, 2011 at 9:07 AM, Alexandre Durand <
alexandre.durand at tasfrance.com> wrote:

> I have been trying to force a giga port to come up without any physical
> device connected on this port wuith a c6500. I thought the trick was to set
> no keepalive on the interface but the port is not  coming up and stays down.
> I also disabled auto negogation and turned the port in to speed 1000 and
> duplex full but wih no sucess either.
>
> Is there someone who has ever experienced the trick?
>
 On an ethernet you could try enabling "no negotiate" on the interface, and
force speed and duplex.

Regards

Andrew