[c-nsp] c6500 turn interface up whitout any physical device connected to it

[Alexandre Durand]

Well it s not really a problem, I just don t want  to connect anything 
on this port but still get the port up so I can advertise the network 
over ospf and bgp. I could use loopback interfaces instead but I ll get 
/32 mask advertised over ospf ... and I want to advertise a network mask 
like  /24. Or an other solutionmay  be to resdtribute static null route 
with /24 prefix from this routeur ...

On 15/07/11 11:32, Peter Rathlev wrote:
> On Fri, 2011-07-15 at 11:28 +0200, Alexandre Durand wrote:
>> On 15/07/11 10:51, Peter Rathlev wrote:
>>> AFAIK the Catalyst switches cannot "fake" an up link. The specific
>>> problem you're trying to solve might have another solution though.
>>
>> What kind of other solution Peter?
> Pardon me, but that's a little hard to answer without knowing what
> specific problem you're trying to solve. :-)
>


-- 
Alexandre DURAND
TAS FRANCE
WTC 1-K, 1300 route des Crêtes
06560 Valbonne Sophia Antipolis
Phone :    +33 (0)4 92 94 56 93
Fax   :    +33 (0)4 92 94 33 99
Web:       http://www.tasfrance.com
Email :    alexandre.durand at tasfrance.com
peering:   http://as8554.peeringdb.com