[c-nsp] Active Portchannel - Adding new member fails

[Peter Rathlev]

On Thu, 2011-07-28 at 06:28 +1000, mb at adv.gcomm.com.au wrote:
> Jul 27 22:17:44.744 GMT+10: %EC-5-CANNOT_BUNDLE2: Fa0/20 is not 
> compatible with Fa0/21 and will be suspended (trunk mode of Fa0/20 is 
> trunk, Fa0/21 is dynamic)
> 
> Both Fa0/20 + Fa0/21 are configured the same(20 currently shutdown):

Could you post the Po2 configuration also?

> #sh int fastEthernet 0/20 switchport Name: Fa0/20

And show interface Po2 switchport too. Could it be that the port-channel
interface is somehow regarded as dynamic? I know that Fa0/21 shouldn't
be able to be a member then, so it's a long shot.

I personally have no experience with port-channels on 2950.

-- 
Peter