[c-nsp] CIsco 5548P with 2248TP

[John Gill]

Hello Renelson,
Try this config, obviously use whatever fex#, ethernet ports, and 
port-channel numbers you wish:

interface Ethernet1/32
   switchport mode fex-fabric
   fex associate 130
   channel-group 30

esc-n5548-1# sh run int po 30
interface port-channel30
   switchport mode fex-fabric
   fex associate 130


sh fex 130
FEX: 130 Description: FEX0130   state: Online
   FEX version: 5.0(3)N1(1a) [Switch version: 5.0(3)N1(1a)]
   Extender Model: N2K-C2248TP-1GE,  Extender Serial: JAF1416CSEH
   Part No: 73-12748-05
  pinning-mode: static    Max-links: 1
   Fabric port for control traffic: Eth1/32
   Fabric interface state:
     Po30 - Interface Up. State: Active
     Eth1/32 - Interface Up. State: Active

At the bottom of "show fex nnn detail" is a log showing what the fabric 
extender is doing.

Regards,
John Gill
cisco

On 6/2/11 3:21 PM, Chris Evans wrote:
> Post your configuration. We've rolled quite a few of them.
> On Jun 2, 2011 2:53 PM, "Renelson Panosky"<panocisco77 at gmail.com>  wrote:
>> Have anybody here is running Cisco Nexus 5548P with 2248TP. I configured
>> everything but i still can't see the Cisco Nexus 2248TP. Can anyone help
> me
>> with this ?