[c-nsp] EoMPLS Remote Port Shutdown

[Arie Vayner (avayner)]

Yuri,

7600 support Remote Port Shutdown per the below documentation reference,
but it does not actually shutdown the whole port, but actually used
E-OAM to signal to the CPE that the PW is down...

What are you trying to achieve?

Thanks
Arie


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Yuri Bank
Sent: Thursday, June 02, 2011 22:00
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] EoMPLS Remote Port Shutdown

Does anyone know if this feature is in fact supported on the
7600(RSP720-3C-GE)?

There seems to be conflicting information between the Feature Navigator
and other related documents.

According to this article, it is supported as of 12.2(33)SRB, for the
7600.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_remote
prtshtdn.html

I was curious if anyone knows off hand, or has the resources to easily
find out.

-Yuri
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/