[c-nsp] Input Queue

[Mohammad Khalil]

Hi , please find below

CR1.KJ-Building#sh ver
Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICES-M), Version 12.2(33)SRD6, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sun 19-Dec-10 15:46 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICES-M), Version 12.2(33)SRD6, RELEASE SOFTWARE (fc3)

 CR1.KJ-Building uptime is 1 week, 3 days, 16 hours, 20 minutes
Uptime for this control processor is 1 week, 3 days, 16 hours, 21 minutes
System returned to ROM by reload (SP by reload)
System restarted at 00:29:41 EET Tue May 31 2011
System image file is "sup-bootdisk:c7600s72033-advipservices-mz.122-33.SRD6.bin"
Last reload type: Normal Reload

cisco CISCO7606-S (R7000) processor (revision 1.0) with 983008K/65536K bytes of memory.
Processor board ID FOX1213GJYZ
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 SIP-400 controller (5 GigabitEthernet).
18 Virtual Ethernet interfaces
71 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

CR1.KJ-Building#sh int g3/3 | inc que
  Input queue: 0/2000/6399/0 (size/max/drops/flushes); Total output drops: 0
  Output queue: 0/40 (size/max)
CR1.KJ-Building#sh int g3/11 | inc que
  Input queue: 0/2000/2648/0 (size/max/drops/flushes); Total output drops: 1401
  Output queue: 0/40 (size/max)
CR1.KJ-Building#sh int g3/19 | inc que
  Input queue: 0/2000/10019/0 (size/max/drops/flushes); Total output drops: 120
  Output queue: 0/40 (size/max)
CR1.KJ-Building#sh int g3/27 | inc que
  Input queue: 0/2000/9453/0 (size/max/drops/flushes); Total output drops: 0
  Output queue: 0/40 (size/max)
CR1.KJ-Building#sh int g3/35 | inc que
  Input queue: 0/2000/51673/0 (size/max/drops/flushes); Total output drops: 0
  Output queue: 0/40 (size/max)

CR1.KJ-Building#sh int port-channel 10 | inc que
  Input queue: 0/2000/80352/0 (size/max/drops/flushes); Total output drops: 0
  Output queue: 0/40 (size/max)

> Date: Fri, 10 Jun 2011 08:38:38 -0400
> From: johgill at cisco.com
> To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Input Queue
> 
> Is this a 6500?  Can you output a show ver and a show module?
> 
> Do you also see input queue drops on the physical interfaces? (show 
> inteface)?
> 
> Do you see high CPU at some times?  This would indicate traffic may be 
> software switched.
> 
> Regards,
> John Gill
> cisco
> 
> 
> On 6/10/11 7:46 AM, Mohammad Khalil wrote:
> >
> >
> >
> >
> >
> > hi all
> >
> > i have etherchannel consisting of 5 G interfaces
> > the port-channel is assigned to VLAN 10 (SVI created)
> > i cleared the counters on the interface yesterday and today
> > Input queue: 0/75/962/962 (size/max/drops/flushes)
> > what is the issue ?
> >