[c-nsp] Cisco 7606-S

[LM]

12.2SRC5 here running EIGRP, BGP, multicast nat, PBR....

Just today I found this issue :P, it is scary:

RSat2#sh ip ro vrf EU_Idirect_Normal 10.53.0.226
Routing Table: EU_Idirect_Normal
Routing entry for 10.53.0.226/32
   Known via "connected", distance 0, metric 0 (connected)
   Redistributing via eigrp 151, bgp 65001, rip
   Routing Descriptor Blocks:
   * directly connected, via GigabitEthernet1/5
       Route metric is 0, traffic share count is 1

RSat2#sh run int GigabitEthernet1/5
Building configuration...
Current configuration : 61 bytes
!
interface GigabitEthernet1/5
  no ip address
  shutdown
end

RSat2#sh ip cef vrf EU_Idirect_Normal 10.53.0.225 detail
10.53.0.225/32, epoch 2, flags attached, receive
   receive for GigabitEthernet1/5

It is a X-File :P

Fixed with a "no shut" and "shut" over Gi1/5


El 11/06/11 10:49, Gert Doering escribió:
> Hi,
>
> On Sat, Jun 11, 2011 at 01:12:26AM +0200, Dominik Bay wrote:
>>> what is the stable version to use on Cisco 7606-S ?
>> You should measure the visible moon tonight at 0239, divide by 7.78 and check if it the number fits the people died in the spanish civil war.
>> Do a case shift on the first three numbers, add the fourth number and you've probably the most stable version calculated.
> I think you forgot to add the right letter for the holy patron of routing
> for the appropriate regional calendar.
>
> "IOS for 7600 must have lots of letters!!!"
>
> gert
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/