[c-nsp] modify cisco router config with scripting?

[Engelhard Mahandar Labiro]

I use Teraterm Macro script to automate some repetitive tasks in the
router/switch.
Have a look at
http://ttssh2.sourceforge.jp/manual/en/macro/

On Wed, Jun 15, 2011 at 6:26 PM, d tbsky <tbskyd at gmail.com> wrote:
> hi:
>   I want to write a script to modify the acl entry for cisco 3725 and
> cisco 3750G.
> I find now cisco can use ssh pub key authentication to execute
> command. but it needs IOS version 15 which my platforms don't support.
> I can also use perl cisco module to emulate the cli interaction, but I
> think the method seems not very safe.
>
>  are there other ways to do this kind of work? can I use snmpset to
> modify acl or use snmpset to run some tclsh script on the
> router/switch?
>
>  thanks a lot for your information!!
>
> Regards,
> tbskyd
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>