[c-nsp] ATA with CME

[Daniel Hooper]

I found the firmware load needs to be specified under telephony-server and the image available on your tftp server before it they will register.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of ccie
Sent: Monday, 20 June 2011 1:22 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ATA with CME

Hi experts,

 

Is there any special to define an ASA with CME, I configure 

Ephone 

Type asa

Mac .....

But still can't see it as registered?

 

Regards,

Amin

 

 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/