[c-nsp] Dot11Radio0 ipv6 command

[Michael K. Smith - Adhost]

You can do IPv6 on the 87x series, it's just kludgy.  You have to use a
separate /64 for the wireless and attach it to the VLAN interface, while
leaving the IPv4 address on the dot11Radio interface.

If anyone would like to see a working configuration let me know and I'll
send it offlist.

Mike

On 6/20/11 2:31 PM, "Gert Doering" <gert at greenie.muc.de> wrote:

>Hi,
>
>On Mon, Jun 20, 2011 at 12:33:52PM -0700, Seth Mattinen wrote:
>> I ended up using a Mikrotik + telco cpe at home and retired the 877W,
>> but yeah, I gave up on IPv6 wireless with the 877W. I'm not entirely
>> sure what makes the wireless interface so different than every other
>> interface that easily supports IPv6, but whatever.
>
>Standard Cisco answer #412: "the corresponding BU has no interest"
>
>Standard Vendor answer #714: "what is this IPv6 thing?"
>
>*sigh*
>
>gert
>-- 
>USENET is *not* the non-clickable part of WWW!
>                  
>//www.muc.de/~gert/
>Gert Doering - Munich, Germany
>gert at greenie.muc.de
>fax: +49-89-35655025
>gert at net.informatik.tu-muenchen.de
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/