[c-nsp] Dot11Radio0 ipv6 command

[Michael K. Smith - Adhost]

This is the workaround when you can't put the address on the BVI, which
you can't in some cases.

Mike

On 6/22/11 1:24 AM, "Juergen Marenda" <jm at ilk.net> wrote:

>
>Sorry, 
>but I do not see the difference beetween IPv4 and IPv6 Behaviour here.
>
>As far as i remember you put the LAN-Interface vlan1
>and the radio-(sub-)interface into the same bridge-group
>and configure the IPv4 (or Ipv6) on the bvi interface
>to emulate the "normal" behaviour of home-customer-CPE's.
>
>Juergen.
>