[c-nsp] Cisco IAD 2431, auto dial on pick up of handset?

John Osmon josmon at rigozsaurus.com
Thu Jun 23 14:20:29 EDT 2011


On Thu, Jun 23, 2011 at 01:25:21PM -0400, Scott Granados wrote:
> Hi,
> 
> Been googling but haven't found a good example to work with.  Does
> anyone have an example configuration for a Cisco IAD device so that when
> a user picks up an attached handset it auto dials a number.  This is for
> a outside office phone to ring in to the building type arrangement.
> Any pointers / config snippets would be appreciated.

Look for something along the lines of:
   voice-port 1/1/0
    connection plar opx <someNumber>

someNumber would be the extension you're trying to auto-dial.


More information about the cisco-nsp mailing list