[c-nsp] Cisco IAD 2431, auto dial on pick up of handset?

[Jay Hennigan]

On 6/23/11 10:25 AM, Scott Granados wrote:
> Hi,
> 
> Been googling but haven't found a good example to work with.  Does anyone have an example configuration for a Cisco IAD device so that when a user picks up an attached handset it auto dials a number.  This is for a outside office phone to ring in to the building type arrangement.   Any pointers / config snippets would be appreciated.

voice port 2/0
 connection plar 18005551212


PLAR = Private Line Auto Ringdown (dial on going off-hook)


--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV