[c-nsp] Cant Ping Tunnel Originating from VRF Instance

[Righa Shake]

Lee I am using the vrf command.I have changed ny config to as below but
still unable to ping across

ROUTER A CONFIGURATIONS

interface Tunnel10
  ip vrf forwarding SHAKE_MNGT
 ip address 172.16.2.1 255.255.255.252
 keepalive 30 3
 tunnel source GigabitEthernet0
 tunnel destination D.D.D.D
 tunnel path-mtu-discovery
 tunnel vrf Mgmt-intf



ROUTER B CONFIG
interface Tunnel10
  ip address 172.16.2.2 255.255.255.252
 keepalive 30 3
 tunnel source D.D.D.D
 tunnel destination X.X.X.X
 tunnel path-mtu-discovery
!

I cant seem to be able to ping the point to point IP's

Regards,
Righa Shake

On Tue, Mar 1, 2011 at 5:49 PM, Lee Riemer <lriemer at bestline.net> wrote:

> Are you specifying the vrf interface in your ping command?
>
>
>
> On 3/1/2011 8:02 AM, Righa Shake wrote:
>
>> I have created a tunnel whose tunnel source is a public IP on a VRF
>> instance.However i cant seems t ping on the point to point from my router.
>> Am trying to have two different routes to the same router via different
>> paths
>>
>> My settings are as follows:
>>
>>
>> interface Tunnel10
>>   ip address 172.16.2.1 255.255.255.252
>>  keepalive 30 3
>>  tunnel source Z.Z.Z.Z
>>  tunnel destination Y.Y.Y.Y
>>  tunnel vrf Mgmt-intf
>> end
>>
>> ROUTERA#
>>
>>
>> interface Tunnel10
>>   ip address 172.16.2.2 255.255.255.252
>>  keepalive 30 3
>>  tunnel source Y.Y.Y.Y
>>  tunnel destination Z.Z.Z.Z
>> end
>>
>> ROUTERB#
>>
>>  From router to router i cant seem to ping across.
>> An traffic doesnt seem to pass through this link.
>>
>> Any assistance is highly appreciated.
>>
>> Regards,
>> Righa Shake
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>