[c-nsp] vlan dot1q tag native

[Michael K. Smith - Adhost]

On 3/8/11 7:59 PM, "jack daniels" <jckdaniels12 at gmail.com> wrote:

>Hi guys,
>
>If I have
>
>
>Vlan100 , Vlan 2 , Vlan 3 -------------Trunk Dot1Q------------Cisco
>3550 Switch1 --------SwitchA
>
>Vlan 100 is native vlan .While frame goes out to SwitchA from
>Switch1, I want to tag the frames of native vlan also . So that on
>Switch A I get tagged traffic for Vlan 100 , 2, 3
>
>is this possible via vlan dot1q tag native
>

As long as SwitchA can understand that the native VLAN is coming in
tagged, then yes.

Mike