[c-nsp] Strange 7600 behavior

[Raphael Costa]

Roland,

Thanks for your quickly response.

See bellow:

Router#sh proc c | e 0.00
CPU utilization for five seconds: 16%/14%; one minute: 9%; five minutes: 4%
 PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
  74         404         216       1870  1.67%  0.37%  0.09%   1 Virtual
Exec
 259          12      432919          0  0.07%  0.08%  0.07%   0 Ethernet
Msec Ti

Router#sh fm sum
Interface: GigabitEthernet4/1 is up
  TCAM screening for features: ACTIVE inbound
Interface: GigabitEthernet5/2 is up
  TCAM screening for features: ACTIVE inbound



2011/3/16 Dobbins, Roland <rdobbins at arbor.net>

>
> On Mar 16, 2011, at 10:51 PM, Raphael Costa wrote:
>
> > With a very few traffic, about 400Mb, I got the router consuming much
> more cpu, due interrupts, than sup7203bxl.
>
> This likely means traffic's being punted.  Do sh proc c | e 0.00, and sh fm
> sum.
>
> -----------------------------------------------------------------------
> Roland Dobbins <rdobbins at arbor.net> // <http://www.arbornetworks.com>
>
>                The basis of optimism is sheer terror.
>
>                          -- Oscar Wilde
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Raphael Bittencourt S. Costa
raphaelbscosta at yahoo.com.br
raphaelbscosta at gmail.com