[c-nsp] Cisco 6509e with PoE

[Matlock, Kenneth L]

What does a 'show power inline g3/5' show?

Ken Matlock
Network Analyst
Exempla Healthcare
(303) 467-4671
matlockk at exempla.org



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Wil Schultz
Sent: Wednesday, March 16, 2011 2:56 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco 6509e with PoE

I've got a 6509e that PoE doesn't seem to be working on, it's completely
possibly that I'm missing something but I can't seem to figure out what
it could be.

I've got a wireless base station that was plugged into a 3750G-PoE
working great, and I'm attempting to move it over to a WS-X6548-GE-TX
card, darn thing is not coming up.

Here's some information, possibly someone can shed some light. I've
verified that the port is good, the cable is good, the device is good,
all that's left is the 6509e.

######################
core-sw1#show running int gi 3/5
Building configuration...

Current configuration : 168 bytes
!
interface GigabitEthernet3/5
 description wireless_ap
 switchport
 switchport access vlan 254
 switchport mode access
 load-interval 30
 power inline static
end
!
!
!
!
core-sw1#show int gi 3/5           
GigabitEthernet3/5 is down, line protocol is down (notconnect)
  Hardware is C6k 1000Mb 802.3, address is 0001.6416.a6e2 (bia
0001.6416.a6e2)
  Description: wireless_ap
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, 
     reliability 255/255, txload 0/255, rxload 0/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Auto-duplex, Auto-speed, media type is 10/100/1000BaseT
  input flow-control is off, output flow-control is desired 
  Clock mode is auto
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops:
0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  30 second input rate 0 bits/sec, 0 packets/sec
  30 second output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts (0 multicasts)
     0 runts, 0 giants, 0 throttles 
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 0 multicast, 0 pause input
     0 input packets with dribble condition detected
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 4 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
!
!
!
!
core-sw1#show power status module 3
                        Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
3    WS-X6548-GE-TX      142.80  3.40   142.80  3.40  on    on
!
!
!
!
core-sw1#show module 3
Mod Ports Card Type                              Model
Serial No.
--- ----- -------------------------------------- ------------------
-----------
  3   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX
SAD082506JZ

Mod MAC addresses                       Hw    Fw           Sw
Status
--- ---------------------------------- ------ ------------ ------------
-------
  3  0001.6416.a6de to 0001.6416.a70d  10.1   7.2(1)       8.7(0.22)H2A
Ok

Mod  Sub-Module                  Model              Serial       Hw
Status 
---- --------------------------- ------------------ ----------- -------
-------
  3  Cisco Voice Daughter Card   WS-F6K-VPWR-GE     SAD08250CK1  1.1
Ok

Mod  Online Diag Status 
---- -------------------
  3  Pass
!
!
!
!
######################

Thanks!


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/