[c-nsp] What is the lowest latency switch?
Ziv Leyes
zivl at gilat.net
Thu Mar 17 02:59:00 EDT 2011
Even if you had the time to test them, how would you exactly be able to confirm the specs? Do you have a way to measure the <1.9 µsec forwarding latency and confirm it's correct?
Just wondering...
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jeroen van Ingen
Sent: Wednesday, March 16, 2011 7:25 PM
To: jm at ilk.net
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] What is the lowest latency switch?
Hi,
> What about "H3C" "3com" S5820X ?
>
> May be renamed or renumbered to hp procurve, but spec says:
>
> "...
> Additionally, in order to reduce
> latency in the network core or data center environment, the
> S5820X features cut-through switching as well as store and
> forward mode switching.
> ...
> Forwarding Latency<1.9 µsec (FIFO 64-byte packets)
> ...
> "
>
> For a< 200W (under full load) device
> (compared to the 1100W of my 4900M's ) this sounds good for Layer2
> device.
>
> Any experience with that box ?
>
Well, I have three of those on my desk right now, but to be honest I haven't had much time to test them. I'm trying them out for basic L2 switching, a bit of routing and a small amount of EoMPLS.
Specs & docs look good, pricing seems OK, but as "experience" with the box goes I've only configured an address on them and performed a software upgrade.
If you have specific questions, don't hesitate to ask, perhaps I can get the answers quickly.
Regards,
Jeroen
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************
The information contained in this e-mail message and its attachments is confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the sender, and then delete the message from your computer. Thank you!
******** This mail was sent via Mail-SeCure System.********
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************
More information about the cisco-nsp
mailing list