[c-nsp] DHCP_PD usage for PPPoE Access

[Miquel van Smoorenburg]

There's always a customer that bridges the PPP connection to a PC on 
which the connection is terminated.

And though we don't want it, modems will turn up that do IPv6 NAT.

And what address do you think will be used as source address for 
connections originating from the CPE ? Like SIP ?

In all those cases, the WAN address is used for outgoing connections.

Mike.

On 25-03-11 9:16 PM, Frank Bulk wrote:
> Why would the IPv6 address on the WAN interface ever be seen?  Clients
> attached to the CE router would be using the delegated prefix...
>
> Frank
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Miquel van
> Smoorenburg
> Sent: Friday, March 25, 2011 7:51 AM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] DHCP_PD usage for PPPoE Access
>
> <snip>
>
> The advantage is that you *know* what address or range the CPE has. If
> it also uses an address gotten via SLAAC on the WAN interface, how are
> you going to find the customer when the government asks "who is (or was)
> behind this IPv6 address" and it's from your shared pool ?
>
> Mike.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>