[c-nsp] Cisco 3945 With SM-ES2-16-P module

[suryantofang]

Dear Guys,

Right now I have brand new C3945 Router with SM-ES2-16-P module insert to the chassis.
when I need to configure the switch I need to execute service-module command.

Need your opinion :
1 .how do I configure Dynamic routing from switch module such as OSPF and adjacency  it's own C3945 router chasis ?

2. the switch module, that like emulate IOS C35560 Switch ? 


notes:
RC3945#dir

Directory of flash0:/



1  -rw-    58991496  Jan 10 2011 18:32:30 +07:00  

c3900-universalk9-mz.SPA.151-2.T2.bin

    2  -rw-        2903  Jan 10 2011 18:54:30 +07:00  cpconfig-39xx.cfg

    3  -rw-     2941440  Jan 10 2011 18:54:42 +07:00  cpexpress.tar

    4  -rw-        1038  Jan 10 2011 18:54:52 +07:00  home.shtml

    5  -rw-      115712  Jan 10 2011 18:55:00 +07:00  home.tar

    6  -rw-     1697952  Jan 10 2011 18:55:14 +07:00  

securedesktop-ios-3.1.1.45-k9.pkg

    7  -rw-      415956  Jan 10 2011 18:55:28 +07:00  

sslclient-win-1.1.4.176.pkg


when I go inside switch module with executed :  the service-module interface slot/port session command



Sw35560#dir

Directory of flash:/



4  -rwx        1048   Mar 1 1993 00:01:20 +00:00  multiple-fs

    2  -rwx    13437143  Apr 20 1905 18:37:01 +00:00  

c3560e-universalk9-mz.122-52.EX1.bin


my guide that already use when configure : http://www.cisco.com/en/US/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html

I thank you in advanced for the oppinion and help.

Warm Regards,



-SuryantoFang-

" Hey, It's my learning time..!!!"