[c-nsp] 6500/BGP/full route tables [even more] confusing...

[Andriy Bilous]

disregard =)

On Sat, Mar 26, 2011 at 8:22 PM, Andriy Bilous <andriy.bilous at gmail.com> wrote:
> As far as I'm aware there is no DFC in 6516, it's a "legacy" card with
> a single 8Gb (duplex) connection to the fabric. Your output actually
> confirms that, saying CEF256. Are there any other modules in the
> chassis?
>
> On Sat, Mar 26, 2011 at 8:05 PM, Jeff Kell <jeff-kell at utc.edu> wrote:
>> On 3/26/2011 2:32 PM, Jon Lewis wrote:
>>> On Sat, 26 Mar 2011, Jeff Kell wrote:
>>>> I intended to upgrade this to "something" suitable for full routing
>>>> tables, and went for a Sup720/PFC3CXL.  A million routes, right?
>>>
>>> Not really.  The million routes thing is highly misleading.
>>
>> It at least "depends on a whole lot of things".  I'll settle for half.
>> Just not 192K.
>>
>>>> Received another WS-X6516-GBIC but with a DFC3A.  Powers up, but
>>>> switches everything to "PFC3A" mode [192K routes]:
>>>
>>> If you're not doing that much traffic, is removing the DFC from the
>>> WS-X6516-GBIC an option?
>>
>> I don't know, that's why I'm asking, but if that's a viable option, will
>> certainly give it a try.
>>
>> Jeff
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>