[c-nsp] New Joiner - ME3600X and tools
Keegan Holley
keegan.holley at sungard.com
Mon Mar 28 18:01:59 EDT 2011
On Mon, Mar 28, 2011 at 5:28 PM, Simon Lockhart <simon at slimey.org> wrote:
> On Mon Mar 28, 2011 at 02:22:55PM -0700, Seth Mattinen wrote:
> > The only thing any of us can really do about that is decline to buy it.
> > Otherwise there is no perceivable effect in sales to its lack of IPv6
> > support, and no driving force to get it there.
>
> Depends what you want to use it for. I've got one (so far) which I'm going
> to
> be using as an EoMPLS endpoint. It has all the features I need for that.
>
I suppose, but then you don't have any way to do multipoint topologies.
>
> If I wanted an ethernet access box that did L3 with IPv4 and IPv6, then I
> would
> (and do) use a 3560G (or 3560E if I need 10G).
>
Until need to do mpls. There are also limitations with mac-address tables
and the like. Maybe you can use both at the same time? ;)
>
> Simon
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
More information about the cisco-nsp
mailing list