[c-nsp] How to use multiple virtual web servers with one 1 public IP address?

[Jim Lucas]

I realize this is not a Cisco solution, but it is how I would do it if I were in
your shoes.

I would use a proxy server to match on hostname and direct the connection to the
correct internal virtual servers IP address.  Personally I would use Apache on
OpenBSD.  Only because that is what I am familiar with.

On 3/28/2011 6:22 PM, Bayasgalan Bayantur wrote:
> I'm working on a solution where we will be setting up 40 virtual web servers
> on a single server using Linux Redhat and VMWare .
> 
> Unfortunately, we only have 3 free public IP addresses to use, so I need to
> have a basically a single public IP which would route a request to the
> appropriate server. All web server using TCP 80 port.
> 
> which kind of solution in cisco router and switch ?

--
Jim Lucas