[c-nsp] netflow top-talkers

[Jon Harald Bøvre]

Hi

Same result on our 7609's at SRE3.

 From command reference:
http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_01.html#wp1014717

ip flow-top-talkers

To configure NetFlow top talkers to capture traffic statistics for the 
unaggregated top flows of the heaviest traffic
patterns and most-used applications in the network, use the ip 
flow-top-talkers command in global configuration mode.
To disable NetFlow top talkers, use the no form of this command.

ip flow-top-talkers
no ip flow-top-talkers

Tip    The ip flow-top-talkers command does not appear in the 
configuration until you have configured the
  top number and sort-by [bytes | packets] commands.
Router(config)# ip flow-top-talkers
Router(config-flow-top-talkers)# top 4
Router(config-flow-top-talkers)# sort-by bytes


When I try to configure:
520-060(config)#ip flow-top-talkers
                                ^
% Invalid input detected at '^' marker.

Assume this to be a bug

Jon h Bøvre



On 29.03.2011 19:53, Alexey wrote:
> Hi,
>
> I have updated Cisco IOS c7600rsp72043_rp-ADVENTERPRISEK9-M from version
> 122-33.SRB4 to 122-33.SRE3 on my Cisco 7600.
> Аfter update I can't find command RR(config)#ip flow top-talkers, but in
> the enable mode I can see that:
> RR#show ip flow top-talkers
> % Top talkers not configured
>
> Is this image supports netflow top-talkers?
>
> Thank you for answers.
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/