[c-nsp] New Joiner - ME3600X and tools

[Waris Sagheer (waris)]

IPv6 Unicast Routing and host connectivity are being planned for Q4CY11.
6PE and 6VPE are being planned for Q2CY12.

-Waris


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Keegan Holley
Sent: Tuesday, March 29, 2011 10:54 AM
To: Leigh Harrison
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] New Joiner - ME3600X and tools

On Mon, Mar 28, 2011 at 8:06 AM, Leigh Harrison <
lharrison at convergencegroup.co.uk> wrote:

> Hello there group,
>
>
> First question then:
>
> We're just about to buy a job lot of ME3600X's - anyone using them and
> any feedback on them (especially on them running IPv6)?
>
> covered

>
>
> And Second questions whilst I'm on:
>
> What tools are you guys using (ideally open source ones) to keep an
eye
> on your networks?  (Especially Jitter)
>

to answer your original question the cisco gear and the other metro
vendors
have built in management and monitoring capabilities in CFM and *ITU*-T
G.8261 (cisco may have made a proprietary version as they did with ITU
G.8032/REP).  You can usually just graph the readings with the standard
open
source tools.  I can't recommend one as I've never used OSS for this in
production, but it's not really complicated to setup though.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/