[c-nsp] netflow top-talkers

[Asbjorn Hojmark - Lists]

I would think it's doable with Flexible NetFlow in SRE.
Haven't tried, though.

-A

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
bounces at puck.nether.net] On Behalf Of Mack McBride
Sent: Tuesday, March 29, 2011 9:54 PM
To: Matlock, Kenneth L; Jon Harald Bøvre; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] netflow top-talkers

This is also not available in 12.0(33)S5 or S8 on the 12k platform or
12.2(33)SRD1 on the 7600 platform.
It is probably better to do this on a netflow capture box than on the
supervisor since this is software intensive.

Mack McBride
Network Architect

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
bounces at puck.nether.net] On Behalf Of Matlock, Kenneth L
Sent: Tuesday, March 29, 2011 1:36 PM
To: Jon Harald Bøvre; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] netflow top-talkers

Works just fine on a 6506 Sup720-3B, on SXI5.

Ken Matlock
Network Analyst
Exempla Healthcare
(303) 467-4671
matlockk at exempla.org


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
bounces at puck.nether.net] On Behalf Of Jon Harald Bøvre
Sent: Tuesday, March 29, 2011 12:17 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] netflow top-talkers

Hi

Same result on our 7609's at SRE3.

 From command reference:
http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_01.html#wp1
014717

ip flow-top-talkers

To configure NetFlow top talkers to capture traffic statistics for the 
unaggregated top flows of the heaviest traffic
patterns and most-used applications in the network, use the ip 
flow-top-talkers command in global configuration mode.
To disable NetFlow top talkers, use the no form of this command.

ip flow-top-talkers
no ip flow-top-talkers

Tip    The ip flow-top-talkers command does not appear in the 
configuration until you have configured the
  top number and sort-by [bytes | packets] commands.
Router(config)# ip flow-top-talkers
Router(config-flow-top-talkers)# top 4
Router(config-flow-top-talkers)# sort-by bytes


When I try to configure:
520-060(config)#ip flow-top-talkers
                                ^
% Invalid input detected at '^' marker.

Assume this to be a bug

Jon h Bøvre



On 29.03.2011 19:53, Alexey wrote:
> Hi,
>
> I have updated Cisco IOS c7600rsp72043_rp-ADVENTERPRISEK9-M from version
> 122-33.SRB4 to 122-33.SRE3 on my Cisco 7600.
> Аfter update I can't find command RR(config)#ip flow top-talkers, but in
> the enable mode I can see that:
> RR#show ip flow top-talkers
> % Top talkers not configured
>
> Is this image supports netflow top-talkers?
>
> Thank you for answers.
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/