[c-nsp] mcast designated router priority widget on cat4?

[Christian MacNevin]

I actually found it right after sending that - the rule of exposing yourself on the internet I guess :)

It was the one to the left, James. I was basically just missing the (obvious now) point that it was an interface command and not
a global command. Rusty!

Thanks though everyone :)





On Mar 30, 2011, at 7:04 AM, James Slepicka wrote:

> Hello,
> 
> Refer to this diagram: http://www.nemulator.com/mcast_problem.png
> 
> Which scenario are you describing?
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Christian MacNevin
> Sent: Tuesday, March 29, 2011 3:51 PM
> To: Cisco-nsp
> Subject: [c-nsp] mcast designated router priority widget on cat4?
> 
> Hi,
> 
> I've got multicast data flowing to my hsrp/stp secondaries owing to DR election preferring the highest physical IP. The command I'd like to have access to is something along the lines of 'ip pim dr-priority X.' Buuut I can't find anything like it.
> 
> I'm running 12.2(53)SG2 Enterprise Services SSH.
> 
> Cheers
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/