[c-nsp] Cisco ME 3400 Switch + dot1.Q Tunneling

[Eric Cables]

I'd also be interested in feedback on anyone with ME-3400/3600/3800 devices
deployed, specifically wrt REP implementations.

-- Eric Cables


On Mon, May 2, 2011 at 12:18 PM, <sthaug at nethelp.no> wrote:

> > Just wondering if anyone here uses the Cisco ME 3400E Switch, and any
> > comments on performance? Key feature needed would be Layer2 dot1.Q
> > tunneling, and the other option is using the 3560G series.
>
> We use the ME-3400EG-12CS-M, mostly for the DC power supply and the
> possibility of using REP. Performance is fine (line rate) - but note
> that the ME3400E, like the 3560, has fairly small buffers.
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>