[c-nsp] pseudowire

[nigel cooper]

I am trying to create a psuedowire between two 7600 routers and don't seem to be 
able to get the VC up. I can do it between two 3700 routers at each end but with 
the 7600s the VC shows DOWN. The infrastructure is the same (testing in a lab 
environment). Has anyone ever used a pseudowire between two 7600's ? 



Trunking is not an option.

Diag here, just swap 3725s for 7600s in diag and use int gi4/48 for fe0/0, int 
gi4/47 swpt acc 222 for Fe 0/1 and created int vlan 222 to add the xconnect 
statement.

http://nncooper2.fortunecity.com/psmpls/LAB%20MPLS6.jpg

Any help/ideas appreciated.



7604C#show mpls l2 vc

21 56 LAB TAS B02 Local intf     Local circuit              Dest address    VC 
ID      Status    

21 56 LAB TAS B02 -------------  -------------------------- --------------- 
---------- ----------
21 56 LAB TAS B02 Vl222          Eth VLAN 222               1.10.1.10       
222        DOWN      



7604D#sho mpls l2 vc

21 55 LAB TAS B02 Local intf     Local circuit              Dest address    VC 
ID      Status    

21 55 LAB TAS B02 -------------  -------------------------- --------------- 
---------- ----------
21 55 LAB TAS B02 Vl222          Eth VLAN 222               1.10.1.9        
222        DOWN      

21 55 LAB TAS B02 7604D#

3725B#sho mpls l2 vc
21 47 LAB TAS B02 
21 47 LAB TAS B02 Local intf     Local circuit              Dest address    VC 
ID      Status    

21 47 LAB TAS B02 -------------  -------------------------- --------------- 
---------- ----------
21 47 LAB TAS B02 Fa0/1.222      Eth VLAN 222               1.10.1.7        
222        UP        

21 47 LAB TAS B02 3725B#