[c-nsp] traffic not passing between Cisco 3750G and & Cisco 7206vxr

Md. Jahangir Hossain jrjahangir at yahoo.com
Wed May 18 05:39:15 EDT 2011


Dear all;



i faced a packet passing problem between  Cisco 3750G and & Cisco 7206vxr.Switch and router point to point connected also shown switch interface is up.


Cisco Switch;

Cisco WS-C3750G-24PS (PowerPC405) processor (revision F0) with 118784K/12280K bytes of memory.
Last reset from power-on
3 Virtual Ethernet interfaces
28 Gigabit Ethernet interfaces

Port configuration:

interface GigabitEthernet1/0/1
 description PP2.CORE
 power inline never
 switchport access vlan 102
 switchport mode access
 load-interval 30
 speed 100
 duplex full

Router Port Config :

interface FastEthernet1/0
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 load-interval 30
 duplex full

Router Information:

Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)

Image text-base: 0x60008954, data-base: 0x61C02000

ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(13)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

System image file is "sup-slot0:/c7200-is-mz.123-1a.bin"
cisco 7204VXR (NPE225) processor (revision A) with 245760K/16384K bytes of memory.
R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
4 slot VXR midplane, Version 2.1


if you have any idea please share it.




thanks
jahangir






More information about the cisco-nsp mailing list